Published: يوليو 10, 2020

App – Pressure & Flow

Quick Start – This app simulates the pressure and flow inside an espresso machine while a shot is running. To view the effects of these changes in real time during a shot, click on ‘Graph’ and then ‘Start’, and the app will simulate an espresso being pulled, showing you how the pressure and flow change as the المقاومة at the القُرص changes because of extraction. Change the pressure or flow restriction during the shot to see how pressure profiling and restriction profiling can affect flow during a shot.

Run multiple shots to see the graphs overlaid on top of one another and compare the effect of different changes. Click ‘Clear’ to clear the graph at any time.

You can also view a full-screen version of the Pressure and Flow app هنا.

Understanding the interactions between pressure, flow, and المقاومة can be difficult. Baristas are used to adjusting لضغط الضخ as their primary variable, but engineers often think of pressure as something that develops as a result of المقاومة, rather than the output from the pump.

The Pressure and Flow app explains these interactions in a visual way to help you develop an intuitive understanding of them, without having to memorise the equations underlying the physics. Once you have a grasp of it, you should be able to explain:

  • Why لضغط الضخ alone isn’t enough to control pressure in the القُرص
  • Why the flow restrictor mainly affects the beginning and end of a shot
  • How pressure profiling works differently in different machines
  • How restriction profiling machines like the Slayer affect flow during a shot
  • Why flow profiling requires a machine to make adjustments many hundreds of times per second

In this video, we show you how to experiment with these settings in the app, and how to simulate the pressure and flow inside different types of espresso machine.

 

No Pressure Without المقاومة

The first thing to understand is that the pressure at the القُرص doesn’t only depend on the لضغط الضخ. If you set the القُرص المقاومة to zero, then the water just shoots right through and no pressure can build up. As you increase the القُرص المقاومة, you’ll see that pressure starts to build up.

To conceptualise this, think of the difference between blowing through a straw and inflating a balloon: no matter how hard you blow, the straw doesn’t get pressurised. Whereas the balloon puts up المقاومة, so pressure builds up as you inflate it.


المقاومة from the القُرص during an extraction is variable, so the pressure will vary with it. This tells you right away that changing the لضغط الضخ isn’t enough to get a specific pressure or flow rate through the القُرص.

 

The Flow Restrictor

If you set the القُرص المقاومة setting in the app to zero, you can see that the flow restrictor has a big effect on flow. But if you put the القُرص المقاومة on the highest setting, you can see that the added المقاومة from the flow restrictor has barely any effect on flow. This means that the flow restrictor has the biggest effect at times when the القُرص المقاومة is lowest — in other words, during pre-infusion and towards the end of the shot.

 

Pressure and Flow Profiling

Pressure profiling machines have two ways of working. They either change the لضغط الضخ at specific times during the shot, like the Synesso MVP Hydra or the Sanremo Opera, or they try to maintain specific pressure at the القُرص, like La Marzocco’s Strada.

The limitation of fixing pressure at the pump is that it doesn’t account for changes in المقاومة. In the Strada, however, the machine changes the لضغط الضخ to maintain a specified pressure at the القُرص. For example, if you set the machine to stay on 9 bars, the pump will keep working harder and harder to keep the pressure up, to counteract the loss of المقاومة as the القُرص erodes. Try maintaining a fixed pressure at the القُرص in the app, and you’ll see the لضغط الضخ has to continually increase to compensate for the loss of المقاومة.

Flow profiling machines approach the problem in a different way: they try to control the outgoing flow rate. To do this, they must constantly monitor the flow and adjust the other parameters to compensate. Try it for yourself: start a shot, and after pre-infusion ends try to keep the flow at a fixed rate — say, 2 ml/s — by adjusting the لضغط الضخ or flow restrictors during the shot. You’ll find that however quick your reflexes are, it’s almost impossible to get the flow rate perfectly flat.

For more detail on these exercises and the physics behind them, take a look at the chapters on الضغط و التدفق in our latest online course called المهارات الاحترافية لإعداد الإسبريسو - (قيد الترجمة), only available with a Barista Hustle Unlimited subscription.

 

A Few Notes About the App

If you change the القُرص pressure setting in the Pressure and Flow app, then the لضغط الضخ will adjust to supply the pressure you need. Flow is capped at 15 ml/s so if you lower the المقاومة too much, then the لضغط الضخ will drop accordingly.

The simulation of القُرص المقاومة is greatly simplified — the idea is just to give an idea of how unexpected changes in المقاومة change flow. In the app, changes to المقاومة during the shot are randomised, so that no two shots are exactly alike, to show you how difficult it is for espresso to be consistent when the القُرص itself is never completely consistent. In a real القُرص، فإن المقاومة would change according to the amount of extraction, the لزوجة of the liquid in the القُرص, and the لضغط الضخ, among other factors. The app keeps this simple so that you can focus on the fundamentals.

7 التعليقات

  1. piotr.trzaskalski

    I love this application! Great to get knowledge about espresso machin or espresso itself…My question is: What kind of machine is the Lelit bianca wich is my home machine? Flow profile or flow restrictor?!

    • BHLearn

      Hi Piotr. Nice looking machine. We haven’t tried that specific model but we did a a bit of youtubing and it looks quite clear that the paddle on the V2 operates a needle valve that controls the flow of water entering the group. So you can reduce the pressure from the maximum with impressive responsiveness though you can’t increase the pressure above the maximum that the rotary pump is applying. So it’s kind of a hybrid, but a ‘flow restrictor’ machine in essence.

  2. petros.mesologgitis

    Hi im new in the group and i have a question about portafilter. It’s better to keep it on the group if you dont use it for 30 min? Or take it out? I hear many different opinions about that and i believe that you are the only one who can help me.

    • BHLearn

      Hi there Petros, To ensure portafilters are hot and pre-heated before use, we like to leave them inserted in the group head when we are not using them. However, it’s best not to have the firmly inserted because this can wear out your seals faster, so just have them losely inserted, and definitely don’t leave spent coffee pucks in them when you’re not using them :D. As an added bonus :D, we recommend you remove the filter basket and wipe out the portafilter every half hour.

  3. lukasunzh

    Great app, love it so much and it’s very practical.
    I just have a little question here, firstly, we always say that to serve the purpose of achieving certain extraction goals, we can manipulate the puck resistance(grinding size) by observing the influence air density has on the bean density. And in the last paragraph here, it shows that the viscosity of the liquid in the puck has an influence on the puck resistance as well. I know people always say that there is no direct relation between viscosity and density. However, I feel it may has a relation somehow in this case. Is that true or I’m just being stupid, LOL

    Thank you guys, whoever responds to this, and stay safe fellows 🙂

    • BHLearn

      Hi Luka, thanks for the kind words! The liquid in espresso is more dense as well as more viscous than water, if you exclude crema. But it’s the viscosity that matters in terms of how much resistance to flow there is in the system. To be clear, the viscosity of the espresso isn’t changing anything in the puck, it’s just harder to push a more viscous liquid through the puck.

إرسال تعليق

30 Day Money Back Guarantee+
30 Day Money Back Guarantee

Signup for a personal BH Membership with a 30 day money back guarantee! Signup is risk-free and you can cancel your membership at any time!